Knowledge Spreading

Tuesday, December 31, 2013

Create Multiple Instance or Multiple Windows Service for Jboss Application Server 7.1.1 Final

Consideration:

1. Create Two Windows Service

2. Deployment of Two different applications in one Jboss App Server.

3. Run one application on windows service 1 and Run Second application windows service 2

As per my previous post we are able to create one Windows service, now I am trying to create two or multiple windows services.

When trying to create multiple services be careful for following points.

1. Create two separate bat files like serviceAS1.bat , serviceAS2.bat , serviceAS3.bat .. etc

2. Create two separate deployment directories inside C:\jboss-as-7.1.1.Final\

3. Name of services name should be different like

For Service 1

set SVCNAME=JBOSSASONE

set SVCDISP= JBOSSASONE

set SVCDESC=JBoss Application Server 7.1.1 Final GA/Platform: Windows x64 ONE

For Service 2

set SVCNAME=JBOSSASTWO

set SVCDISP= JBOSSASTWO

set SVCDESC=JBoss Application Server 7.1.1 Final GA/Platform: Windows x64 TWO

4. Give separate name to all the log entries in service.bat file e.g

For Service 1 -> run1.log, shutdow1.log

For Service 2 -> run2.log, shutdown2.log

5. Remove all lock entry in start service and stop service code from service.bat file. (We can keep as it )

I have created below 2 different service.bat files, refer below file

ServiceAS1.bat

@echo off

REM JBoss, the OpenSource webOS

REM

REM Distributable under LGPL license.

REM See terms of license at gnu.org.

REM

REM -------------------------------------------------------------------------

REM JBoss Service Script for Windows

REM -------------------------------------------------------------------------

@if not "%ECHO%" == "" echo %ECHO%

@if "%OS%" == "Windows_NT" setlocal

set DIRNAME=%CD%

REM

REM VERSION, VERSION_MAJOR and VERSION_MINOR are populated

REM during the build with ant filter.

REM

set SVCNAME=JBOSSASONE

set SVCDISP=JBOSSASONE

set SVCDESC=JBoss Application Server 7.1.1 Final GA/Platform: Windows x64 ONE

set NOPAUSE=Y

REM Suppress killing service on logoff event

set JAVA_OPTS=-Xrs -Xms1024M -Xmx1024M

REM Figure out the running mode

if /I "%1" == "install" goto cmdInstall

if /I "%1" == "uninstall" goto cmdUninstall

if /I "%1" == "start" goto cmdStart

if /I "%1" == "stop" goto cmdStop

if /I "%1" == "restart" goto cmdRestart

if /I "%1" == "signal" goto cmdSignal

goto cmdEnd

REM jbosssvc retun values

REM ERR_RET_USAGE 1

REM ERR_RET_VERSION 2

REM ERR_RET_INSTALL 3

REM ERR_RET_REMOVE 4

REM ERR_RET_PARAMS 5

REM ERR_RET_MODE 6

:errExplain

if errorlevel 1 echo Invalid command line parameters

if errorlevel 2 echo Failed installing %SVCDISP%

if errorlevel 4 echo Failed removing %SVCDISP%

if errorlevel 6 echo Unknown service mode for %SVCDISP%

goto cmdEnd

:cmdInstall

jbosssvc.exe -imwdc %SVCNAME% "%DIRNAME%" "%SVCDISP%" "%SVCDESC%" serviceAS1.bat

if not errorlevel 0 goto errExplain

echo Service %SVCDISP% installed

goto cmdEnd

:cmdUninstall

jbosssvc.exe -u %SVCNAME%

if not errorlevel 0 goto errExplain

echo Service %SVCDISP% removed

goto cmdEnd

:cmdStart

REM Executed on service start

del .r.lock 2>&1 | findstr /C:"being used" > nul

if not errorlevel 1 (

echo Could not continue. Locking file already in use.

goto cmdEnd

)

jbosssvc.exe -p 1 "Starting %SVCDISP%" > run1.log

call standalone.bat -Djboss.home.dir=C:/jboss-as-7.1.1.Final

-Djboss.server.base.dir=standalone1 --server-config=standalone1.xml >> run1.log 2>&1

jbosssvc.exe -p 1 "Shutdown %SVCDISP% service" >> run1.log

goto cmdEnd

:cmdStop

REM Executed on service stop

jbosssvc.exe -p 1 "Shutting down %SVCDISP%" > shutdown1.log

call jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown >> shutdown1.log 2>&1

jbosssvc.exe -p 1 "Shutdown %SVCDISP% service" >> shutdown1.log

goto cmdEnd

:cmdRestart

REM Executed manually from command line

REM Note: We can only stop and start

jbosssvc.exe -p 1 "Shutting down %SVCDISP%" >> shutdown1.log

call jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown >> shutdown1.log 2>&1

:waitRun

REM Delete lock file

del .r.lock > nul 2>&1

REM Wait one second if lock file exist

jbosssvc.exe -s 1

if exist ".r.lock" goto waitRun

echo Y > .r.lock

jbosssvc.exe -p 1 "Restarting %SVCDISP%" >> run1.log

call standalone.bat -Djboss.home.dir=C:/jboss-as-7.1.1.Final -Djboss.server.base.dir=standalone1 --server-config=standalone1.xml >> run1.log 2>&1

jbosssvc.exe -p 1 "Shutdown %SVCDISP% service" >> run1.log

del .r.lock

goto cmdEnd

:cmdSignal

REM Send signal to the service.

REM Requires jbosssch.dll to be loaded in JVM

@if not ""%2"" == """" goto execSignal

echo Missing signal parameter.

echo Usage: service signal [0...9]

goto cmdEnd

:execSignal

jbosssvc.exe -k%2 %SVCNAME%

goto cmdEnd

:cmdEnd

Standalone1.xml configuration for run first Application on http port

<connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/>

<virtual-server name="default-host" enable-welcome-root="true">

</virtual-server>

</subsystem>

<inet-address value="${jboss.bind.address.management:127.0.0.1}"/>

</interface>

<inet-address value="${jboss.bind.address:127.0.0.1}"/>

</interface>

<inet-address value="${jboss.bind.address.unsecure:127.0.0.1}"/>

</interface>

</interfaces>

<socket-binding-group name="standard-sockets" default-interface="public"

port-offset="${jboss.socket.binding.port-offset:0}">

<socket-binding name="management-native" interface="management" port="${jboss.management.native.port:9999}"/>

<socket-binding name="management-http" interface="management" port="${jboss.management.http.port:9990}"/>

<socket-binding name="management-https" interface="management" port="${jboss.management.https.port:9443}"/>

<socket-binding name="ajp" port="8009"/>

<socket-binding name="http" port="8081"/>

<socket-binding name="https" port="8443"/>

<socket-binding name="osgi-http" interface="management" port="8090"/>

<socket-binding name="remoting" port="4447"/>

<socket-binding name="txn-recovery-environment" port="4712"/>

<socket-binding name="txn-status-manager" port="4713"/>

<outbound-socket-binding name="mail-smtp">

<remote-destination host="localhost" port="25"/>

</outbound-socket-binding>

</socket-binding-group>

ServiceAS2.bat

@echo off

REM JBoss, the OpenSource webOS

REM

REM Distributable under LGPL license.

REM See terms of license at gnu.org.

REM

REM -------------------------------------------------------------------------

REM JBoss Service Script for Windows

REM -------------------------------------------------------------------------

@if not "%ECHO%" == "" echo %ECHO%

@if "%OS%" == "Windows_NT" setlocal

set DIRNAME=%CD%

REM

REM VERSION, VERSION_MAJOR and VERSION_MINOR are populated

REM during the build with ant filter.

REM

set SVCNAME=JBOSSASTWO

set SVCDISP=JBOSSASTWO

set SVCDESC=JBoss Application Server 7.1.1 Final GA/Platform: Windows x64 TWO

set NOPAUSE=Y

REM Suppress killing service on logoff event

set JAVA_OPTS=-Xrs -Xms1024M -Xmx1024M

REM Figure out the running mode

if /I "%1" == "install" goto cmdInstall

if /I "%1" == "uninstall" goto cmdUninstall

if /I "%1" == "start" goto cmdStart

if /I "%1" == "stop" goto cmdStop

if /I "%1" == "restart" goto cmdRestart

if /I "%1" == "signal" goto cmdSignal

goto cmdEnd

REM jbosssvc retun values

REM ERR_RET_USAGE 1

REM ERR_RET_VERSION 2

REM ERR_RET_INSTALL 3

REM ERR_RET_REMOVE 4

REM ERR_RET_PARAMS 5

REM ERR_RET_MODE 6

:errExplain

if errorlevel 1 echo Invalid command line parameters

if errorlevel 2 echo Failed installing %SVCDISP%

if errorlevel 4 echo Failed removing %SVCDISP%

if errorlevel 6 echo Unknown service mode for %SVCDISP%

goto cmdEnd

:cmdInstall

jbosssvc.exe -imwdc %SVCNAME% "%DIRNAME%" "%SVCDISP%" "%SVCDESC%" serviceAS2.bat

if not errorlevel 0 goto errExplain

echo Service %SVCDISP% installed

goto cmdEnd

:cmdUninstall

jbosssvc.exe -u %SVCNAME%

if not errorlevel 0 goto errExplain

echo Service %SVCDISP% removed

goto cmdEnd

:cmdStart

REM Executed on service start

del .r.lock 2>&1 | findstr /C:"being used" > nul

if not errorlevel 1 (

echo Could not continue. Locking file already in use.

goto cmdEnd

)

jbosssvc.exe -p 1 "Starting %SVCDISP%" > run2.log

call standalone.bat -Djboss.home.dir=C:/jboss-as-7.1.1.Final

-Djboss.server.base.dir=standalone2 --server-config=standalone2.xml >> run2.log 2>&1

jbosssvc.exe -p 1 "Shutdown %SVCDISP% service" >> run2.log

goto cmdEnd

:cmdStop

REM Executed on service stop

jbosssvc.exe -p 1 "Shutting down %SVCDISP%" > shutdown2.log

call jboss-cli.bat --connect controller=127.0.0.1:19999 command=:shutdown >> shutdown2.log 2>&1

jbosssvc.exe -p 1 "Shutdown %SVCDISP% service" >> shutdown2.log

goto cmdEnd

:cmdRestart

REM Executed manually from command line

REM Note: We can only stop and start

jbosssvc.exe -p 1 "Shutting down %SVCDISP%" >> shutdown1.log

call jboss-cli.bat --connect controller=127.0.0.1:19999 command=:shutdown >> shutdown2.log 2>&1

:waitRun

REM Delete lock file

del .r.lock > nul 2>&1

REM Wait one second if lock file exist

jbosssvc.exe -s 1

if exist ".r.lock" goto waitRun

echo Y > .r.lock

jbosssvc.exe -p 1 "Restarting %SVCDISP%" >> run2.log

call standalone.bat -Djboss.home.dir=C:/jboss-as-7.1.1.Final

-Djboss.server.base.dir=standalone2 -config=standalone2.xml >> run2.log 2>&1

jbosssvc.exe -p 1 "Shutdown %SVCDISP% service" >> run2.log

del .r.lock

goto cmdEnd

:cmdSignal

REM Send signal to the service.

REM Requires jbosssch.dll to be loaded in JVM

@if not ""%2"" == """" goto execSignal

echo Missing signal parameter.

echo Usage: service signal [0...9]

goto cmdEnd

:execSignal

jbosssvc.exe -k%2 %SVCNAME%

goto cmdEnd

:cmdEnd

Configuration of Standalone2.xml to run second Application on http port

<connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/>

<virtual-server name="default-host" enable-welcome-root="true">

</virtual-server>

</subsystem>

<inet-address value="${jboss.bind.address.management:127.0.0.1}"/>

</interface>

<inet-address value="${jboss.bind.address:127.0.0.1}"/>

</interface>

<inet-address value="${jboss.bind.address.unsecure:127.0.0.1}"/>

</interface>

</interfaces>

<socket-binding-group name="standard-sockets" default-interface="public"

port-offset="${jboss.socket.binding.port-offset:10000}">

<socket-binding name="management-native" interface="management" port="${jboss.management.native.port:9999}"/>

<socket-binding name="management-http" interface="management" port="${jboss.management.http.port:9990}"/>

<socket-binding name="management-https" interface="management" port="${jboss.management.https.port:9443}"/>

<socket-binding name="ajp" port="8009"/>

<socket-binding name="http" port="8081"/>

<socket-binding name="https" port="8443"/>

<socket-binding name="osgi-http" interface="management" port="8090"/>

<socket-binding name="remoting" port="4447"/>

<socket-binding name="txn-recovery-environment" port="4712"/>

<socket-binding name="txn-status-manager" port="4713"/>

<outbound-socket-binding name="mail-smtp">

<remote-destination host="localhost" port="25"/>

</outbound-socket-binding>

</socket-binding-group>

Installation of Windows Services

C:\jboss-as-7.1.1.Final\bin>serviceAS1.bat install

Installed JBOSSASONE

Service JBOSSASONE installed

C:\jboss-as-7.1.1.Final\bin>serviceAS2.bat install

Installed JBOSSASTWO

Service JBOSSASTWO installed

Consider for Windows 7

1) Open Windows Management console using run. Click on start button, in Run or search text box type service. Now on the top we are able to service option. Click on in. Or Also we can access service in Windows Management console by using task manager.

2) After windows management console search our service in it and change the startup type Manual to Automatic which would make sure that whenever you start/bootup your system the JBoss AS 7 services starts up automatically.

3) Click on start service, status will change to started.

4) To stop the service we have to click on stop link in Windows Management Console

5) We can stop service using command like

C:\jboss-as-7.1.1.Final\bin>serviceAS1.bat stop

C:\jboss-as-7.1.1.Final\bin>serviceAS2.bat stop

6) r if the server not shutdown or stopped properly through service then we can execute below command from command prompt to stop the service.

C:\jboss-as-7.1.1.Final\bin> jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown;

You will get output like as follows

Shutting down JBOSSASONE [2013-12-26 17:18:26]

{"outcome" => "success"}

Shutdown JBOSSASONE service [2013-12-26 17:18:28]

C:\jboss-as-7.1.1.Final\bin> jboss-cli.bat --connect controller=127.0.0.1:19999 command=:shutdown;

You will get output like as follows

Shutting down JBOSSASTWO [2013-12-26 17:20:26]

{"outcome" => "success"}

Shutdown JBOSSASTWO service [2013-12-26 17:20:28]

URLs for two Applications

Considering above services are in running state. How to access these two applications

First Application:

http://localhost:8081/myFirstWebApp/index.html

Second Application

http://localhost:18081/mySecondWebApp/index.html

Because we have configured standalone2.xml

<socket-binding-group name="standard-sockets" default-interface="public"

port-offset="${jboss.socket.binding.port-offset:10000}">

portoffset is 10000 + localhost http port 8081 = 18081

http://localhost:18081/mySecondWebApp/index.html

Configure Second application to HTTPS port

If we want run second application on https port then we need to configure standalone2.xml

In https connector as mentioned in my previous post for configuring http using keytool or

If we have the trusted key provided by certification authority then we can configure in connector in standlone2.xml file.

Ref: http://knowledgespreading.blogspot.com/2013/12/ssl-configuration-injboss-7.html

Run the application on https port

http://localhost:18443/mySecondWebApp/index.html

Friday, December 27, 2013

Errors on Start or Stop the Service of Jboss7.1.1 Final Application Server

Below error comes when we try to stop the Jboss Service from winodows console

Error Message :

Jboss Application server 7.1.1 service on Local Computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs.

Ans :

Above Error comes because of the shutdown command used in service.bat is not correct. The shutdown command is not executed correctly, so after this error jboss server instance is in running state.

So We need to shutdown the Jboss server first.

Use below command to shutdown server

C:\jboss-as-7.1.1.Final\bin> jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown;

You will get output like as follows

Shutting down JBOSSASONE [2013-12-26 17:18:26]

{"outcome" => "success"}

Shutdown JBOSSASONE service [2013-12-26 17:18:28]

If above command executed successfully then uninstall service using below command

C:\jboss-as-7.1.1.Final\bin>service.bat uninstall

Then open service.bat and check line number 84 and 94 update these line number with below change

call jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown >> shutdown.log 2>&1

Then install new service and verify service start and stop functions

JBOSS 7.1.1 Final Run as Windows Service

Run as Single Service

We can create Windows Service for Run JBOSS 7.1.1 Final

Please follow below step to create Windows Service

1) To create windows service we need below files

· jbosssvc.exe

· jbossweb.x64.exe

· jbosswebw.x64

· service.bat

2) But Above files not present in In C:\jboss-as-7.1.1.Final\bin directory.

3) So We need to download these files from below link

Download Link: http://www.jboss.org/jbossweb/downloads/jboss-native-2-0-10

Please select downloads as per your operating system , I am using Windows 7 is 64 bit OS

So I have downloaded below bundles

binaries 2.0.10-windows x64

jboss-native 2.0.10 zip bundles

1.5M

2011-08-10

LGPL

Unzip this bundle it will shows

C:\jboss-native-2.0.10-windows-x64-ssl\

\bin

\licenses

4) Copy all files and folder from bin directory of C:\jboss-native-2.0.10-windows-x64-ssl\ bin\

To C:\jboss-as-7.1.1.Final\bin

So all above 4 files and 1 native folder now available in C:\jboss-as-7.1.1.Final\bin

5) Run.bat and shutdown.bat not present in C:\jboss-as-7.1.1.Final\bin so

Instead of Run.bat - > use	standalone.bat
Instead of shutdown.bat -> use	jboss-cli.bat

6) We need to update Service.bat file , instead of that create copy of service.bat we call it

serviceAS.bat.

We need to modify the serviceAS.bat file as per our requirement

7) Open ServiceAS.bat got line number 20, 21 ,22 update these lines.

set SVCNAME=JBOSSASONE

set SVCDISP= JBOSSASONE

set SVCDESC=JBoss Application Server 7.1.1 Final GA/Platform: Windows x64

8) Go to line number 26 and change the line as per below options

set JAVA_OPTS=-Xrs -Xms1024M -Xmx1024M

9) Go to line number 55 and make change as per below code , serviceAS.bat need update instead of service.bat

jbosssvc.exe -imwdc %SVCNAME% "%DIRNAME%" "%SVCDISP%" "%SVCDESC%" serviceAS.bat

10) Now Go to line number 75 and 104 , update these line as per below

call standalone.bat < .r.lock >> run.log 2>&1

As per above mentioned, we are using standalone.bat instead of run.bat

11) In Jboss Application server 7.1.1 Final bin folder there no any shutdown.bat present.

So instead of shutdown.bat use jboss-cli.bat

Go to line number 84 and 94, Update as per below

call jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown >> shutdown.log 2>&1

Even we can execute above command manually from command prompt to stop the service like

C:\jboss-as-7.1.1.Final\bin> jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown;

You will get output like as follows

Shutting down JBOSSASONE [2013-12-26 17:18:26]

{"outcome" => "success"}

Shutdown JBOSSASONE service [2013-12-26 17:18:28]

I have considered default local host controller 127.0.0.1 and 9999 is default management command.

Now we have completed all the changes in serviceAS.bat file

Installation as a Windows Service

After all the changes done in serviceAS.bat now we can install the windows service as per below command

C:\jboss-as-7.1.1.Final\bin>serviceAS.bat install

Installed JBOSSASONE

Service JBOSSASONE installed

Starting Windows Service

We are using Windows 7

1) Open Windows Management console using run.

Click on start button, in Run or search text box type service.

Now on the top we are able to service option. Click on in.

Or we can access by using task manager also.

3) Click on start service, status will change to started.

4) To stop the service we have to click on stop link in Windows Management Console

5) We can stop service using command like

C:\jboss-as-7.1.1.Final\bin>serviceAS.bat stop

6) Or if the server not shutdown or stopped properly through service then we can execute below command from command prompt to stop the service.

C:\jboss-as-7.1.1.Final\bin> jboss-cli.bat --connect controller=127.0.0.1:9999 command=:shutdown;

You will get output like as follows

Shutting down JBOSSASONE [2013-12-26 17:18:26]

{"outcome" => "success"}

Shutdown JBOSSASONE service [2013-12-26 17:18:28]

Thursday, December 5, 2013

SSL Configuration in JBOSS 7.0. Application Server

Creating SSL Certificate using JAVA keytool

Step 1:

Consider Windows 7 as Operating system.

Run Command prompt as administrator

Go to Java Home directory like

C:\Program Files (x86)\Java\jdk1.7.0_09\bin

Step2:

Run the following command to create trusted certificate on

C:\Program Files (x86)\Java\jdk1.7.0_09\bin

1)keytool -genkey -keystore server.keystore -storepass rmi+ssl -keypass mypass -keyalg RSA -alias server -validity 3650 -dname "cn=Server SSL example,ou=admin test,dc=jboss,dc=org"

2) keytool -export -alias server –keystore server .keystore -rfc -file public.cert

3) keytool -import -alias server -file public.cert –storetype JKS -keystore server.truststore

It will ask for password, please provide mypass as a password

Step 3:

After running all this command, all file like , server.keystore, public.cert , server.truststore will generate in this path C:\Program Files (x86)\Java\jdk1.7.0_09\bin

Need copy all these file to C:\jboss-as-7.1.1.Final\standalone\configuration directory

Step 4:

Open standalone.xml which is using to run the JBOSS server

Copy below code to standlone.xml

</connector>

<virtual-server name="default-host" enable-welcome-root="true">

</virtual-server>

</subsystem>

Remember in subsystem tag mention native=”false” otherwise we need remove tomcat native libs from module folder

C:\jboss-as-7.1.1.Final\modules\org\jboss\as\web\main\lib\win-i686\ tcnative-1.dll

Step5:

Make above changes save the file and restart the application.

Consider using IE 8, 9 browsers

Then his the our url https://127.0.0.1:8443/myapplication/index.html

Step6:

Use below steps used to install created certificate to browser

In the Internet Options dialog, click Content, then click Certificates. Click Importand follow the steps in the Certificate Import wizard.

For Internet Explorer 8 and 9
1. Navigate to the Gateway home using an HTTPS URL.
2. At the prompt There is a problem with this website's security certificate, click Continue to this website (not recommended).
3. Click Internet Options on the Tools menu.
4. On the Security tab, click Trusted sites and then click Sites.
5. Confirm that the URL matches the URL you entered and click Add, and then click Close.
6. Close Internet Options.
7. Refresh the web page.
8. At the prompt There is a problem with this website's security certificate, choose Continue to this website (not recommended).
9. Click Certificate Error in the address bar and click View certificates.
10. Click Install Certificate, and then click Next in the Certificate Import Wizard.
11. Select Place all certificates in the following store.
12. Click Browse, click Trusted Root Certification Authorities, and click OK.
13. Click Next in the wizard until you reach the last screen, and then click Finish. If you get a Security Warning message box, click Yes.
14. Click OK.
15. On the Tools menu, click Internet Options.
16. On the Security tab, click Trusted sites and then click Sites.
17. Select the URL you added and click Remove, and then click Close.
18. Restart Internet Explorer.

The web site's certificate as well as any WebSocket URL will now work in Internet Explorer.

You can check configuration on below link

Ref :

https://community.jboss.org/wiki/JBossAS7ConfiguringSSLOnJBossWeb

http://docs.jboss.org/jbossweb/7.0.x/ssl-howto.html#Edit the JBoss Web Configuration File